Стол обеденный MDF Italia TENSE MATERIAL

Accessories – matt black painted
The table is also available in a version equipped with 1 or 2 openings and an undertop tray.‎ The openings in size 350 or 420mm are in aluminium.‎
A steel spring can be inserted into the pre- drilled holes (placed every 50cm) at the bottom of the under top tray to group the cables on the  oor together.‎
The above-mentioned accessories are not available for the brass version.‎
The preciousness and the special processing of the tops may create  finishing and colour differences.‎ Thus any possible visual irregularities of the pattern, shades and surface and colour non uniformity have to be considered precious and unique features.‎
For material technical/aesthetic characteristics, see page 26.‎
For further information about  nishes, please see page 28, material colour/tables.‎
Tense is recommended for indoor use, only.‎ The dimensional tolerance in both width and length is 0/+ 5mm.‎

Table featuring new mono-material  finishes The important technological innovation it incorporates, combined with the tensioning capacity of the components makes it possible to build tabletops in large sizes which remain perfectly  at and also extremely light.‎

Frame and tabletops
- Natural oak wood with transparent acrylic finish.‎ Top, edges and legs coated by 3mm thick solid wood
- Stone, in reconstructed stone, transparent acrylic finish.‎ Top, edges and legs coated with application of 3mm thick material.‎
- Brass, in brass plate, matt brushed finish and transparent acrylic cover.‎ Top, edges and legs coated by 0.‎5mm brass plate.‎
- Carbone, created in solid natural oak wood, thickness 3mm, subjected to surface acid etching treatment applied by using natural acids without chemical additives.‎
This innovative process inspired by alchemists of the past allows to alter the organic properties of wood.‎
The reaction of tannins contained in wood generates natural “burning” that endows the surface with a unique carbonised effect.‎
Contact with the natural acid enhances sensitive wood with the shade and colors of warm intense black, rich in natural gradations that are not uniform but unique.‎
The natural surface features a special extensive matt finish that is rough and worn, a genuine visual and tactile experience for the user.‎
Table featuring new mono-material finishes.‎
The important technological innovation it incorporates, combined with the tensioning capacity of the components makes it possible to build tabletops in large sizes which remain perfectly flat and also extremely light.‎
Top, edges and legs covered with a sheet of material in a thickness of about 3mm.‎
- Marble, this particular finish, reconstructed marble, is made starting with marble dust that has been mixed with a filler and is then spread manually over the entire surface of the table.‎
Top, edges and legs are covered with a sheet of material in a thickness of about 3 mm.‎

The 35mm thick tabletop is a load-bearing composite board built with an internal frame consisting of either aluminium profiles and polystyrene filler (wood and stone) or an acrylic resin honeycomb and two outer layers of aluminium (brass).‎
35x35mm steel legs with internal structural tie-rod.‎

Dimensions
The table is available in 24 sizes, height 73cm.‎ The reduction of maximum sizes for the brass version (up to 120x400cm) represents the technical limits of the materials employed to build the tabletops.‎